TEST EQUIPMENT

All test equip is previously owned unless marked (n) for NOS.
Most separately sold accessories are new (NOS) unless marked u.
CHECK OUT RED PRICE SPECIALS

COMMUNICATION MONITORS

FILTERS

FUNCTION GENERATORS

OSCILLOSCOPES

SIGNAL GENERATORS

TUBE TESTERS

VOMs, VTVM, misc meters

HARNESSES, TEST CABLES

SOLDER-DESOLDER SYSTEMS & ACCESSORIES

All test equipment has been repaired if necessary,
cleaned and calibrated or qualified.
Qualified means it has been checked/aligned
against a known accurate device,
but not necessarily traceable to NIST.

COMMUNICATIONS MONITORS
MODEL NUMBER BRAND Type Description CONDITION QTY Cost New
if known Internet
Price (typical) Our Price
(each)

S1075B &
S1079B
MOTOROLA
made by
Systron-Donner
for Motorola Comm Monitor w/ Freq Counter &
FM Synth & Deviation Monitor
S1079B in left-hand slot 1Hz to 475MHz V. Good ~ includes
both service manuals 1 $3500 was $700
now only
~~$499.00~~
$399.00

FILTERS
MODEL NUMBER BRAND Type Description CONDITION QTY Cost New
if known Internet
Price (typical) Our Price
(each)

2ABR
SOLD OUT
ALLISON Audio
Bandpass 18.7Hz to 20160Hz
600 ohm impedance V. Good 0 ? was $175
now only
$129.00

FUNCTION GENERATORS
MODEL NUMBER BRAND Type Description CONDITION QTY Cost New
if known Internet
Price (typical) Our Price
(each)

2001
SOLD OUT
GLOBAL Sweepable 1Hz to 100KHz Good 0 $179.00 $129.95 -

SIGNAL GENERATORS
MODEL NUMBER BRAND Type Description CONDITION QTY Cost New
if known Internet
Price (typical) Our Price
(each)

TF1066B/6
MARCONI AM/FM RF
Sig Gen 10MHz to 470MHz V. Good
inc. service manual 1 $3340 $1160 was $700
now only
~~$479.00~~
$399.00
LCG387 LEADER Color Bar
Generator RF output
Ch 2 thru 6 Good 1 $275.00 ? was $75.00
now only
$49.00
608C Hewlett-Packard VHF
10MHz-480MHz V.good nla ? $140 -

METERS VOM's, VTVMs, Misc etc.
MODEL NUMBER BRAND Type Description CONDITION QTY Cost New
if known Internet
Price (typical) Our Price
(each)

SP-140
SOLD OUT
AW SPERRY Analog VOM 20K/v DC
10K/v AC
inc. Leads & Case Good 0 $42.00 $29.95 -
W136A-1045
SOLD OUT HONEYWELL Analog
uAmp &
Voltmeter integral w/
case & leads Excellent 0 ? ? -
DVM-37
SOLD OUT SENCORE Digital VOM
Solid State inc. Instant On/
Iso. Probe Very Good
inc. service manual 0 $295.00 ? -

OSCILLOSCOPES
MODEL NUMBER BRAND Type Description CONDITION QTY Cost New
if known Internet
Price (typical) Our Price
(each)

547
Tektronix Dual Trace
Dual Time Base 50MHz V. Good 2; 1; nla $2350 - $-

TUBE TESTERS
MODEL NUMBER BRAND Type Description CONDITION QTY Cost New
if known Internet
Price
(typical) Our Price
(each)

FC123
Sencore Filament Checker
requires non-polarized
TV cheater cord. (not supplied) 7,9 & 10pin submin
8 pin octal & locktal
9 pin novar
12 pin compactron V. Good 1 ? $17.99 $15.99

SOLDER-DESOLDER EQUIPMENT
MODEL NUMBER BRAND Type Description CONDITION QTY Cost New
if known Internet
Price
(typical) Our Price
(each)
TENMA
72-6340 Tenma Digital Desolder Station includes SL-2 desolder gun w/1.4mm tip (requires 1 7/8" length tips)
Gun mount and iron mount; Vacuum tubing Excell/
V. Good 1 $299.95 $322.32 $149.00
SL-2 Tenma Desolder Gun (extra) ~ SOLD OUT requires 1 7/8" length tips, includes 1.0 mm ID tip.
24V, 50W 5 pin Din. Fits 72-6340 & 72-6345 Desolder Stations Excell 0 $39.95 $47.99 -
72-6412 Tenma Desolder Gun Tip 0.8mm ~ SOLD OUT All fit both SL-2 guns listed above.
1 7/8" length tips all similar to 2.0mm picture
all but one in original package Excell 0 $? $- $5.99
72-6413 Tenma Desolder Gun Tip 1.0mm ~ SOLD OUT 0
72-6414 Tenma Desolder Gun Tip 1.2mm ~ SOLD OUT 0
72-6415 Tenma Desolder Gun Tip 1.4mm ~ SOLD OUT 0
72-6417 Tenma Desolder Gun Tip 2.0mm 2; 1
Vactubng Tenma Vacuum Tubing 45", 0.125"ID Fits 72-6340 & 72-6345 Desolder Stations/SL-2 Desolder Guns. Other brands. Orig Pkg Excell 2 $? $? $4.99
72-6347 Tenma Nozzle Cleaner Kit ~ SOLD OUT approx 6" long, 0.7, 1.0 & 1.2mm diam. Orig Pkg
Use w/72-6340 & 72-6345 Desolder Stations/SL-2 Desolder Guns or any solder sucker. Excell 0 $? $12.23 $-
72-6408 Tenma Glass Tube approx 1 15/16" long, 13/16" OD. Orig Pkg. Use with SL-2 Desolder Guns (above). Orig pkgs. Excell 2 $? $2.54 $1.99
72-6409 Tenma Filter Kit Conisists of 1 steel wool & 1 cotton plug. Use with 72-6408 Glass Tube (above). Excell 5 $? $0.99 $0.75
72-6409-C Tenma Cotton Filter Cotton plug for use with 72-6408 Glass Tube; half of 72-6408 filter kit. (above). Excell 5 $? $? $0.45
21-148 Tenma Solder Iron Tip 0.8mm conical All fit 21-147, 21-1590 & 72-6345 Solder Station Irons
using 21-9151 or 72-6346 Soldering Irons

all similar to picture, about 2 - 2.25" long. Orig pkgs. Excell 1 $? $3.99 $3.49
21-925 Tenma Solder Iron Tip 0.6mm long conical Excell 1 $? $3.99 $3.49
21-926 Tenma Solder Iron Tip 3.2mm screwdriver Excell 1 $? $3.99 $3.49
21-927 Tenma Solder Iron Tip 1.2mm long screwdriver Excell 1 $? $2.19 $1.99

PACE
1121-0253 Pace Desolder Tip 0.8mm approx 1" long, 1/8 diameter shank.
Excell 4 $? $2.99 $2.49
1121-0254 Pace Desolder Tip 1.0mm ~ SOLD OUT Excell 3; 0 $? $2.99 $2.49
1121-0255 Pace Desolder Tip 1.5mm ~ SOLD OUT Excell 1; 0 $? $2.99 $2.49
1121-0485 Pace Desolder Tip 0.8mm approx 1 7/8" long, 1/8 diameter shank. Excell 3 $? $3.59 $2.99
1360-0083 Pace Adaptor (w/set screw) Adapts 3/16" shank to 1/8 diameter shank. Orig pkg. Excell 1 $? $9.19 $7.35
1348-0547 Pace Set Screws for above adaptor and SX-70 Desolder tools dated 1/90 or newer Excell 3 $? 10/$10.16 1/$1.50
1121-0627 Pace Desolder Tip 2.29mm overall 2.5- 3" long with 1 1/8 long tail. For SX-80 series Extractors. Orig pkgs.
Excell 5 $? 5/$54.28 1/$10.99
1121-0630 Pace Desolder Tip 1.52mm Excell 5 $? 5/$54.28 1/$10.99
1121-0679 Pace Desolder Tip 1.02mm Excell 4 $? 5/$27.36 1/$5.99
1121-0682 Pace Desolder Tip 0.76mm Excell 5 $? 5/$37.22 1/$7.99
1121-0357 Pace Solder Tip Conical, 0.4mm 3/16" diameter shank. Fits IR-70, PS-80 irons; others Excell 1 $? 5/$34.01 1/$5.71
1263-0021 Pace Vacuum Valve Stem ~ SOLD OUT Fits Fits PACE MBT100 & MBT200 Desolder Stations. Excell 1; 0 $? $3.00 $2.35
1285-0033 Pace Flow Control Valve ~ SOLD OUT Fits Fits PACE MBT100 & MBT200 Desolder Stations. Orig Pkg Excell 1; 0 $? $15.99 $11.99
WELLER - UNGAR Weller bought out Ungar in the 1990s. Ungar numbers were retained as Weller numbers
PL332 Ungar Solder Tip Offset 0.01 cone Plated, Overall 1" long, 1/8" Thread. Orig package.
Excell 1 $? $4.80 $3.85
PL333 Ungar Solder Tip Straight 0.13 chisel Excell 1 $? $4.80 $3.85
CT5Ax sim7 ? Flat Conical tip 0.062" x 0.062"
Shank Diameter 0.24" (6.2mm).
Shank Knob Diam. 0.21" (5.4mm). Overall 2.5" long, Reach 1.1". Similar to Weller CT series. 700°
Excell 1 $? $7.29 $5.13
smt093 ? SMT Chip Removal Tip, Gap=0.093" head width=0.19" Overall 1 7/16" long, Shank & Shank Knob Diameter 0.21" (5.4mm).

Similar to Weller PT series. 700° Excell 1 $? $9.99 $7.50
smt140 ? SMT Chip Removal Tip, Gap=0.140" head width=0.22" Excell 1 $? $9.99 $7.50
7135 / 7135W Weller Solder Gun Tip, 0.165" tip width Fits 8100, 8200, D440, 9200 Guns. Two pair in orig pkg.
Excell Pkg/2
3
$? Pkg/2
$5.00 Pkg/2
$4.49
PX7987 ? Tip Sponge 3" x 2" Trimable. Similar to MCM 21-79xx series Excell 2 $? $2.49 $2.05

Jump to Tube Index
Jump to Other Products
Jump to Order Information

PAGE DESIGNED BY PAX COMM

Last Update: 4/27/2017
Copyright Š2017 by Patuxent Communications - ALL RIGHTS RESERVED

MODEL NUMBER	BRAND	Type	Description	CONDITION	QTY	Cost New if known	Our Price (each)
COMMUNICATIONS MONITORS
S1075B & S1079B	MOTOROLA made by Systron-Donner for Motorola	Comm Monitor w/ Freq Counter & FM Synth & Deviation Monitor S1079B in left-hand slot	1Hz to 475MHz	V. Good ~ includes both service manuals	1	$3500	was $700 now only ~~$499.00~~ $399.00

MODEL NUMBER	BRAND	Type	Description	CONDITION	QTY	Cost New if known	Our Price (each)
FILTERS
2ABR SOLD OUT	ALLISON	Audio Bandpass	18.7Hz to 20160Hz 600 ohm impedance	V. Good	0	?	was $175 now only $129.00

MODEL NUMBER	BRAND	Type	Description	CONDITION	QTY	Cost New if known	Internet Price (typical)	Our Price (each)
FUNCTION GENERATORS
2001 SOLD OUT	GLOBAL	Sweepable	1Hz to 100KHz	Good	0	$179.00	$129.95	-

MODEL NUMBER	BRAND	Type	Description	CONDITION	QTY	Cost New if known	Internet Price (typical)	Our Price (each)
SIGNAL GENERATORS
TF1066B/6	MARCONI	AM/FM RF Sig Gen	10MHz to 470MHz	V. Good inc. service manual	1	$3340	$1160	was $700 now only ~~$479.00~~ $399.00
LCG387	LEADER	Color Bar Generator	RF output Ch 2 thru 6	Good	1	$275.00	?	was $75.00 now only $49.00
608C	Hewlett-Packard	VHF 10MHz-480MHz		V.good	nla	?	$140	-

MODEL NUMBER	BRAND	Type	Description	CONDITION	QTY	Cost New if known	Internet Price (typical)	Our Price (each)
METERS	VOM's, VTVMs, Misc etc.
SP-140 SOLD OUT	AW SPERRY	Analog VOM	20K/v DC 10K/v AC inc. Leads & Case	Good	0	$42.00	$29.95	-
W136A-1045 SOLD OUT	HONEYWELL	Analog uAmp & Voltmeter	integral w/ case & leads	Excellent	0	?	?	-
DVM-37 SOLD OUT	SENCORE	Digital VOM Solid State	inc. Instant On/ Iso. Probe	Very Good inc. service manual	0	$295.00	?	-

MODEL NUMBER	BRAND	Type	Description	CONDITION	QTY	Cost New if known	Internet Price (typical)	Our Price (each)
OSCILLOSCOPES
547	Tektronix	Dual Trace Dual Time Base	50MHz	V. Good	2; 1; nla	$2350	-	$-

MODEL NUMBER	BRAND	Type	Description	CONDITION	QTY	Cost New if known	Internet Price (typical)	Our Price (each)
TUBE TESTERS
FC123	Sencore	Filament Checker requires non-polarized TV cheater cord. (not supplied)	7,9 & 10pin submin 8 pin octal & locktal 9 pin novar 12 pin compactron	V. Good	1	?	$17.99	$15.99

MODEL NUMBER	BRAND	Type	Description	CONDITION	QTY	Cost New if known	Internet Price (typical)	Our Price (each)
SOLDER-DESOLDER EQUIPMENT
TENMA
72-6340	Tenma	Digital Desolder Station	includes SL-2 desolder gun w/1.4mm tip (requires 1 7/8" length tips) Gun mount and iron mount; Vacuum tubing	Excell/ V. Good	1	$299.95	$322.32	$149.00
SL-2	Tenma	Desolder Gun (extra) ~ SOLD OUT	requires 1 7/8" length tips, includes 1.0 mm ID tip. 24V, 50W 5 pin Din. Fits 72-6340 & 72-6345 Desolder Stations	Excell	0	$39.95	$47.99	-
72-6412	Tenma	Desolder Gun Tip 0.8mm ~ SOLD OUT	All fit both SL-2 guns listed above. 1 7/8" length tips all similar to 2.0mm picture all but one in original package	Excell	0	$?	$-	$5.99
72-6413	Tenma	Desolder Gun Tip 1.0mm ~ SOLD OUT			0
72-6414	Tenma	Desolder Gun Tip 1.2mm ~ SOLD OUT			0
72-6415	Tenma	Desolder Gun Tip 1.4mm ~ SOLD OUT			0
72-6417	Tenma	Desolder Gun Tip 2.0mm			2; 1
Vactubng	Tenma	Vacuum Tubing 45", 0.125"ID	Fits 72-6340 & 72-6345 Desolder Stations/SL-2 Desolder Guns. Other brands. Orig Pkg	Excell	2	$?	$?	$4.99
72-6347	Tenma	Nozzle Cleaner Kit ~ SOLD OUT	approx 6" long, 0.7, 1.0 & 1.2mm diam. Orig Pkg Use w/72-6340 & 72-6345 Desolder Stations/SL-2 Desolder Guns or any solder sucker.	Excell	0	$?	$12.23	$-
72-6408	Tenma	Glass Tube	approx 1 15/16" long, 13/16" OD. Orig Pkg. Use with SL-2 Desolder Guns (above). Orig pkgs.	Excell	2	$?	$2.54	$1.99
72-6409	Tenma	Filter Kit	Conisists of 1 steel wool & 1 cotton plug. Use with 72-6408 Glass Tube (above).	Excell	5	$?	$0.99	$0.75
72-6409-C	Tenma	Cotton Filter	Cotton plug for use with 72-6408 Glass Tube; half of 72-6408 filter kit. (above).	Excell	5	$?	$?	$0.45
21-148	Tenma	Solder Iron Tip 0.8mm conical	All fit 21-147, 21-1590 & 72-6345 Solder Station Irons using 21-9151 or 72-6346 Soldering Irons all similar to picture, about 2 - 2.25" long. Orig pkgs.	Excell	1	$?	$3.99	$3.49
21-925	Tenma	Solder Iron Tip 0.6mm long conical		Excell	1	$?	$3.99	$3.49
21-926	Tenma	Solder Iron Tip 3.2mm screwdriver		Excell	1	$?	$3.99	$3.49
21-927	Tenma	Solder Iron Tip 1.2mm long screwdriver		Excell	1	$?	$2.19	$1.99
PACE
1121-0253	Pace	Desolder Tip 0.8mm	approx 1" long, 1/8 diameter shank.	Excell	4	$?	$2.99	$2.49
1121-0254	Pace	Desolder Tip 1.0mm ~ SOLD OUT		Excell	3; 0	$?	$2.99	$2.49
1121-0255	Pace	Desolder Tip 1.5mm ~ SOLD OUT		Excell	1; 0	$?	$2.99	$2.49
1121-0485	Pace	Desolder Tip 0.8mm	approx 1 7/8" long, 1/8 diameter shank.	Excell	3	$?	$3.59	$2.99
1360-0083	Pace	Adaptor (w/set screw)	Adapts 3/16" shank to 1/8 diameter shank. Orig pkg.	Excell	1	$?	$9.19	$7.35
1348-0547	Pace	Set Screws	for above adaptor and SX-70 Desolder tools dated 1/90 or newer	Excell	3	$?	10/$10.16	1/$1.50
1121-0627	Pace	Desolder Tip 2.29mm	overall 2.5- 3" long with 1 1/8 long tail. For SX-80 series Extractors. Orig pkgs.	Excell	5	$?	5/$54.28	1/$10.99
1121-0630	Pace	Desolder Tip 1.52mm		Excell	5	$?	5/$54.28	1/$10.99
1121-0679	Pace	Desolder Tip 1.02mm		Excell	4	$?	5/$27.36	1/$5.99
1121-0682	Pace	Desolder Tip 0.76mm		Excell	5	$?	5/$37.22	1/$7.99
1121-0357	Pace	Solder Tip Conical, 0.4mm	3/16" diameter shank. Fits IR-70, PS-80 irons; others	Excell	1	$?	5/$34.01	1/$5.71
1263-0021	Pace	Vacuum Valve Stem ~ SOLD OUT	Fits Fits PACE MBT100 & MBT200 Desolder Stations.	Excell	1; 0	$?	$3.00	$2.35
1285-0033	Pace	Flow Control Valve ~ SOLD OUT	Fits Fits PACE MBT100 & MBT200 Desolder Stations. Orig Pkg	Excell	1; 0	$?	$15.99	$11.99
WELLER - UNGAR		Weller bought out Ungar in the 1990s. Ungar numbers were retained as Weller numbers
PL332	Ungar	Solder Tip Offset 0.01 cone	Plated, Overall 1" long, 1/8" Thread. Orig package.	Excell	1	$?	$4.80	$3.85
PL333	Ungar	Solder Tip Straight 0.13 chisel	Plated, Overall 1" long, 1/8" Thread. Orig package.	Excell	1	$?	$4.80	$3.85
CT5Ax sim7	?	Flat Conical tip 0.062" x 0.062" Shank Diameter 0.24" (6.2mm). Shank Knob Diam. 0.21" (5.4mm).	Overall 2.5" long, Reach 1.1". Similar to Weller CT series. 700°	Excell	1	$?	$7.29	$5.13
smt093	?	SMT Chip Removal Tip, Gap=0.093" head width=0.19"	Overall 1 7/16" long, Shank & Shank Knob Diameter 0.21" (5.4mm). Similar to Weller PT series. 700°	Excell	1	$?	$9.99	$7.50
smt140	?	SMT Chip Removal Tip, Gap=0.140" head width=0.22"		Excell	1	$?	$9.99	$7.50
7135 / 7135W	Weller	Solder Gun Tip, 0.165" tip width	Fits 8100, 8200, D440, 9200 Guns. Two pair in orig pkg.	Excell	Pkg/2 3	$?	Pkg/2 $5.00	Pkg/2 $4.49
PX7987	?	Tip Sponge	3" x 2" Trimable. Similar to MCM 21-79xx series	Excell	2	$?	$2.49	$2.05